返回
Transonic flutter analysis using a fully coupled density based solver for inviscid flow
DOI:10.1016/j.advengsoft.2016.01.012.png)
摘要
En 中文
This paper focuses on the coupling between the high fidelity aerodynamic model for the flow field and the inodal analysis of a typical wing section to carry out flutter analysis. This coupled aeroelastic model is implemented in one of the most widely used open source CFD codes called OpenFOAM. The model is designed to calculate the structural displacement in the time domain based on the free vibration modes of the structure by constructing the numerical model directly from the modal analysis. Essentially a second order ordinary differential equation is solved for each mode as a function of the generalised coordinates. A density based solver using central difference scheme of Kurganov and Tadmor is used to model the flow field. Two main cases of transonic flow over NACA 64A010 are modelled for a forced pitching oscillation airfoil and a self-sustained aerofoil respectively. The self-sustained two degrees of freedom case is modelled for three different possibilities covering damped, neutral and divergent oscillations. Predicted results show very good agreement with the numerical and experimental data available in the literature. (C) 2016 Elsevier Ltd. All rights reserved.
Keyword:
Aeroelasticity
CFD
Transonic flow
Flutter
OpenFOAM
Modal analysis
AI总结
对已上传原文的论文进行重点信息的提取,主要内容包括:简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
期刊
IF:
5.7
论文数:
3.4K
被引数:
1.2W
机构
引用论文
Turbocharger motor-generator for improvement of transient performance in an internal combustion engine用于改善内燃机瞬态性能的涡轮增压器电动发电机

