.png){kind=icon}
返回
Two-layer transient heat transfer using impulse response methods
.png){kind=icon}
OA
AI
DOI：10.1016/j.ijheatmasstransfer.2021.122511.png)
.png){kind=icon}
.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
Solutions to the inverse heat conduction problem (IHCP) are methods that can be used to quantify sur -face heat flux in multi-layer materials for components in which there are limited subsurface (internal) temperature measurements, such as coated components. A critical consideration is to capture high fre-quency fluctuations using a practical heat flux sensor. To that end, this paper highlights key parameters for calculating accurate surface heat transfer. Specifically, this research extends the available solutions to the IHCP for multi-substrate structures through an impulse response methodology. The sensitivity of the impulse method was quantified with respect to practical measurements. When compared to the inverse case, the impulse method resulted in lower errors when calculating surface heat flux over a range of conditions. Overall, this work provides a foundation for deducing heat flux from a subsurface heat flux sensor while maintaining a high-frequency response. (c) 2022 Elsevier Ltd. All rights reserved.
Keyword:
DIGITAL-FILTER
AI总结
对已上传原文的论文进行重点信息的提取，主要内容包括：简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
期刊
IF:
5.8
论文数:
2.6W
被引数:
10.2W
机构
引用论文
Chronic patterns of mother-child coercion: Some differences between insular and noninsular families
.png){kind=icon}
PREAI
分享收藏分享收藏
查看更多内容