返回
Validated ejector model for hybrid system applications
DOI:10.1016/j.energy.2018.08.087.png)
摘要
En 中文
The aim of this work is the presentation of a new model for ejector performance calculation using a commercial tool. Due to the critical issues in recirculation performance, special attention is devoted to applications in hybrid systems based on high temperature fuel cells. The theoretical activity is supported by an experimental rig able to operate tests on ejectors at different operative conditions, with a layout similar to the fuel cell anodic recirculation. The model validation, operated considering experimental data obtained with this rig, is essential to evaluate the tool performance for design and off-design calculations. This aspect is particularly critical due to important limitations in the recirculation ratio (especially for the anodic side), to avoid unacceptable operative conditions in the fuel cells. The results presented in this work were obtained with this validated model for an ejector applied on the anodic side of a Solid Oxide Fuel Cell (SOFC). A parametric analysis was carried out to show the effects of several parameters on the recirculation performance. The fully independent analysis of the influence of different properties (carried out with a specifically validated model) is an important innovative result for the application of such ejectors on high temperature fuel cells. (C) 2018 Elsevier Ltd. All rights reserved.
Keyword:
Ejector
Recirculation
Fuel cell
Hybrid system
AI总结
对已上传原文的论文进行重点信息的提取,主要内容包括:简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
期刊
IF:
9.4
论文数:
4.3W
被引数:
20.2W
机构
引用论文
Smart polygeneration grids: experimental performance curves of different prime movers
APPLIED ENERGY
IF11
A novel throttling strategy for adiabatic compressed air energy storage system based on an ejector基于喷射器的绝热压缩空气储能系统新型节流策略
Performance analysis of a novel organic Rankine cycle with a vapor-liquid ejector具有汽液喷射器的新型有机朗肯循环的性能分析

