返回
Weighting Factorless Model Predictive Thrust Control for Linear Induction Machine
DOI:10.1109/TPEL.2019.2893373.png)
摘要
En 中文
Compared with various commonly used control algorithms for linear induction machine, the model predictive thrust control can achieve multiple optimum control objectives, such as high dynamic performance, low power loss, and low flux and thrust ripples, hut it is difficult to find suitable weighting factors to balance them. The most commonly used method to tune the weighting factors is by enumerating numerous cases, and then evaluating and comparing each case until the best set of weighting factors is achieved, which can be a very long and tedious procedure. This paper proposes two different methods to solve this problem for minimizing the flux and thrust ripples. One method is to use the variable weighting factor related to flux ripple so that the flux ripple can be seen as a hard constraint without complex tuning process. The other is to replace the flux control term by a variable defined with the same unit as the thrust so that the weighting factor can be equal to one without tuning. These two proposed methods have been successfully applied to a test platform consisting of two 3-kW arc induction motors. The experimental results have shown smaller flux and thrust ripples, as well as tracking errors in comparison with two existing common methods, i.e., the fuzzy decision based method and model predictive flux control.
Keyword:
Linear induction machine (LIM)
model predictive thrust control (MPTC)
weighting factor
AI总结
对已上传原文的论文进行重点信息的提取,主要内容包括:简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
期刊
IF:
6.5
论文数:
1.7W
被引数:
8.3W
机构
引用论文
Model Predictive Current Control for PMSM Drives With Parameter Robustness Improvement改进参数鲁棒性的PMSM模型预测电流控制
Model Predictive Torque Control for Torque Ripple Compensation in Variable-Speed PMSMs用于变速pmsm中转矩脉动补偿的模型预测转矩控制
Low-Complexity Finite Control Set Model Predictive Control With Current Limit for Linear Induction Machines具有电流限制的线性感应电机的低复杂度有限控制集模型预测控制

