返回
Zero Voltage Vector Sampling Method for PMSM Three-Phase Current Reconstruction Using Single Current Sensor
DOI:10.1109/TPEL.2016.2588141.png)
摘要
En 中文
For the purpose of reducing cost and volume, techniques of reconstructing three-phase currents through a single current sensor have been reported for permanent magnet synchronous motor vector control system. In existing studies, the reconstruction precision is largely affected by the dead zones in space vector PWM plane, which requires additional efforts to compensate the dead zones either by modifying pulse width modulation (PWM) modulation strategy or by phase-shifting of PWM signal. In this paper, a novel zero voltage vector sampling method (ZVVSM) is proposed, which can move the current reconstruction dead zones in low modulation region and sector boundary regions toward the outline of the space vector hexagon without modifying PWM signal. By arranging the single current sensor at a novel position, the proposed method is able to sample current in two zero voltage vectors (ZVV). ZVVSM avoids the complicated algorithms as well as the increase of the switching times, so that it is beneficial to the PMSM drive performance. The proposed method is validated by both simulation and experiments.
Keyword:
Dead zone
permanent magnet synchronous motor(PMSM)
phase current reconstruction
single current sensor
voltage vector
zero voltage vector sampling method (ZVVSM)
AI总结
对已上传原文的论文进行重点信息的提取,主要内容包括:简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
期刊
IF:
6.5
论文数:
1.7W
被引数:
8.3W
机构
引用论文
Single current sensor technique in the DC link of three-phase PWM-VS inverters: A review and a novel solution三相pwm-vs逆变器直流环节中的单电流传感器技术: 综述和新颖的解决方案
An Overmodulation Method for PWM-Inverter-Fed IPMSM Drive With Single Current Sensor一种单电流传感器PWM逆变器供电IPMSM驱动的过调制方法
Current Prediction in Vector-Controlled PWM Inverters Using Single DC-Link Current Sensor使用单个直流链路电流传感器的矢量控制PWM逆变器中的电流预测
New Hybrid Pulsewidth Modulation Technique to Reduce Current Distortion and Extend Current Reconstruction Range for a Three-Phase Inverter Using Only DC-link Sensor新的混合脉宽调制技术,以减少仅使用直流环节传感器的三相逆变器的电流失真并扩展电流重建范围

