.png){kind=icon}
.png){kind=icon}
Return
A Mechanically Rollable Reflectarray With Beam-Scanning Capabilities
.png){kind=icon}
OA
AI
DOI：10.1109/OJAP.2022.3214273.png)
.png){kind=icon}
Original request for help.png){kind=icon}
Share.png){kind=icon}
Save
Abstract
En 中文
A novel 1-D beam-steerable reflectarray antenna (RA) is proposed for the K-u -band. The RA aperture consists of 24x48 variable size square patch elements printed on a flexible plastic substrate. The aperture is wrapped around two cylinders to create a 12 lambda x12 lambda illumination window at the operating frequency of 14 GHz. Beam-steering is achieved by mechanically rolling the aperture. To mitigate antenna pattern degradation, an aperture phase distribution optimization technique is presented. The performance of this RA system is studied analytically using array theory. The effects of aperture size and unit-cell size are also discussed. The performance of the proposed RA is validated using simulations and measurements. The results illustrate that our design achieves 1-D beam-steering from -21 degrees to +21 degrees in the elevation plane while maintaining towards the broadside direction a maximum realized gain of 25.1 dBi. In this beam-scanning range, the gain variation is less than 1.5 dB, beamwidth variation is less than 1.6 degrees, and the side lobe level is maintained below -15 dB. In summary, the main advantage of our design is its ability to steer its high gain beam without using complicated feed networks or complex mechanical systems. Such antennas are especially needed in SmallSat and space applications.
Keywords:
Mechanical beam-steering
beam-scanning
reflectarray antenna
deployable antenna
small satellite
space applications
Journal
I
IF:
3.6
Papers:
803
Citations:
1.6K
