Return
A MEMS-based flexible multichannel ECoG-electrode array
DOI:10.1088/1741-2560/6/3/036003.png)
Abstract
En 中文
We present a micromachined 252-channel ECoG (electrocorticogram) -electrode array, which is made of a thin polyimide foil substrate enclosing Sputtered platinum electrode sites and conductor paths. The array subtends an area of approximately 35 mm by 60 mm and is designed to cover large parts of a hemisphere of a macaque monkey's cortex. Eight omnetics connectors are directly soldered to the foil. This leads to a compact assembly size which enables a chronic implantation of the array and allows free movements of the animal between the recording sessions. The electrode sites are 1 mm in diameter and were characterized by electrochemical impedance spectroscopy. At 1 kHz. the electrode impedances vary between 1.5 k Omega and 5 k Omega. The yield of functioning electrodes in three assembled devices is 99.5%. After implantation of a device with 100% working electrodes, standard electrocorticographic signals can be obtained from every electrode. The response to Visual stimuli can be measured with electrodes lying on the Visual cortex. After an implantation time of 4.5 months, all electrodes are still working and no decline in signal quality Could be observed.
Keywords:
LOCAL-FIELD POTENTIALS
PARIETAL CORTEX
VISUAL-CORTEX
MICROELECTRODE ARRAY
EVOKED-POTENTIALS
SYNCHRONIZATION
POLYIMIDE
BIOCOMPATIBILITY
RECORDINGS
CIRCUITS
AI Summary
Key information extracted from the uploaded paper, including a brief overview, abstract, background, key highlights, visual analysis, and future outlook.
Journal
IF:
3.8
Papers:
4.0K
Citations:
1.4W
Organization
Cited Papers
Comparative Study of Online Open Circuit Voltage Estimation Techniques for State of Charge Estimation of Lithium-Ion Batteries
Batteries
IF0
Absolute Quantification of Matrix Metabolites Reveals the Dynamics of Mitochondrial Metabolism
Cell
IF0

