.png){kind=icon}
.png){kind=icon}
Return
A Model Predictive Contouring Error Precompensation Method
.png){kind=icon}
PRE
AI
DOI：10.1109/TIE.2019.2921294.png)
.png){kind=icon}
Original request for help.png){kind=icon}
Share.png){kind=icon}
Save
Abstract
En 中文
Contouring error has a significant effect on machining accuracy. In this paper, a model predictive contouring error precompensation method is presented that performs model-based error precompensation with feedback and constraints. The proposed method uses the predicted contouring error without compensation obtained by simulation, as the reference trajectory of the model predictive compensator. It then calculates the compensation signal using a constrained model predictive control algorithm and adds it to the original reference position as the new system input. Experiments were conducted on an X-Y table to compare the proposed method with a traditional cascaded proportional-integral (PI) controller and two existing contouring error precompensation methods. The experimental results show that higher contouring accuracy can be achieved with the proposed method for both sharp corners and free-form curves.
Keywords:
Predictive models
Mathematical model
Error compensation
Machining
Modeling
Closed loop systems
Mechanical systems
Computer numerical control (CNC)
contouring control
error compensation
model predictive control (MPC)
AI Summary
Key information extracted from the uploaded paper, including a brief overview, abstract, background, key highlights, visual analysis, and future outlook.
Journal
IF:
7.2
Papers:
1.8W
Citations:
9.8W