.png){kind=icon}
.png){kind=icon}
Return
A new RRS method for measurement of temperature with magnetic-liquid crystal nanosurface molecularly imprinted polymer probe
.png){kind=icon}
PRE
AI
DOI：10.1016/j.saa.2024.125597.png)
.png){kind=icon}
Original request for help.png){kind=icon}
Share.png){kind=icon}
Save
Abstract
En 中文
A new magnetic-liquid crystal nanosurface molecularly imprinted polymer (5CB-Fe3O4@MIP) resonance Rayleigh scattering temperature sensor was prepared, using liquid crystal 4 '-cyano-4 '-pentylbiphenyl as the temperature sensing element, nano-Fe3O4 as the substrate, methacrylic acid as the functional monomer and ethylene glycol dimethacrylate as the crosslinking agent. It was characterized by molecular spectroscopy, scanning electron microscopy and Fourier transform infrared spectroscopy. The thermosensitive effect of 11 liquid crystals, that is, the relationship between RRS and temperature, was studied. The 4 '-cyano-4 '-pentylbiphenyl exhibits best sensitive. The 5CB-Fe3O4@MIP temperature sensor had a strong resonance Rayleigh scattering peak at 370 nm. The resonance Rayleigh scattering intensity increased with the increase of temperature, and showed a good linear relationship. The temperature range of measurement was 30-95 degrees C, with a slope of 16.8 a.u./degrees C. And by optimizing the preparation conditions of molecularly imprinted polymers, the best preparation conditions were obtained: template molecule: 0.25 mmol, functional monomer: 2.5 mmol, cross-linker: 5 mmol, reaction temperature: 70 degrees C, reaction time: 2.5 h. As a comparison, we also studied the effect of Fe3O4 with different particle sizes on the 5CB-Fe3O4@MIP temperature sensor. At the same time, the temperature sensor is applied to the temperature measurement of cooling water, which is effective.
Keywords:
Liquid crystal
5CB
Nano-Fe 3 O 4
Temperature sensor
Resonance Rayleigh scattering
Journal
IF:
4.6
Papers:
2.4W
Citations:
5.5W