Return
A Novel Centralization Method for Pipe Image Stitching
DOI:10.1109/JSEN.2020.3031637.png)
Abstract
En 中文
The creation of unwrapped stitched images of pipework internal surfaces is being increasingly used to augment routine visual inspection. A significant challenge to the creation of these stitched images is the need to estimate the pose and position of the camera for each frame, which is often alleviated through the use of a mechanical centralizer to ensure the camera is held in the center of the pipe. This article proposes a novel method for image centralization and pose estimation, which is particularly beneficial to circumstances where mechanical centralization is impractical. The approach involves post-inspection centralization of the captured video, by first estimating the probe's position relative to the pipe, using an integrated laser ring projector combined with the camera sensor, and then using this position to unwrap the image, so it produces an undistorted view of the pipe interior (equivalent to unwrapping a centralized view). These unwrapped images are then stacked to produce a stitched image of the pipe interior. In this paper pose estimation was successfully demonstrated to have a 90% confidence interval of +/- 0.5 mm and +/- 0.5 degrees in translation and rotation changes. This pose estimation is then used to create stitched images for both a visual test card image mounted inside a pipe and an aluminum pipe sample with artificial defects, in both cases demonstrating near equivalent results to those obtained using traditional mechanical centralization.
Keywords:
Cameras
Probes
Inspection
Pose estimation
Visualization
Robot vision systems
Remote visual inspection
depth image-based rendering
photogrammetry
image unwrapping
post inspection centralization
AI Summary
Key information extracted from the uploaded paper, including a brief overview, abstract, background, key highlights, visual analysis, and future outlook.
Journal
IF:
4.5
Papers:
2.1W
Citations:
7.3W

