.png){kind=icon}
.png){kind=icon}
Return
A Programmable Interface Circuit for MOS Gas Sensor Array
.png){kind=icon}
PRE
AI
DOI：10.1109/JSEN.2024.3422295.png)
.png){kind=icon}
Original request for help.png){kind=icon}
Share.png){kind=icon}
Save
Abstract
En 中文
In this article, a programmable interface circuit for metal-oxide-semiconductors (MOS) gas sensor array is proposed. Integrated with analog and digital circuits, the interface circuit can realize sensor configuration, signal acquisition, data processing, and recognition results output by embedded with timing and algorithm code. A fully integrated and programmable analog front-end (AFE) circuit is introduced for sensor configuration, such as heating voltage generator, measuring voltage generator, and load resistor selector. A 12-bit SAR ADC supporting multiple channels is used for signal acquisition. Data processing and analysis are completed in a Cortex-M0 processor and recognition results can be output via common digital interfaces. The programmable interface circuit is realized in Nexchip 110 nm embedded flash process platform with an area of $2.53 \times 2.73$ mm. By introducing this interface circuit, an e-nose system with virtualized 16 channels is built up based on four MOS gas sensors and applied in safety monitoring of automotive power lithium batteries. With k-nearest neighbor classification algorithm embedded in the processor, the e-nose system identified gas types of thermal runaway process and output the current state of lithium battery pack with high accuracy.
Keywords:
Gas detectors
Sensors
Temperature sensors
Generators
Voltage measurement
Sensor arrays
Resistors
Analog front-end (AFE)
gas recognition
gas sensor array
programmable
Journal
IF:
4.5
Papers:
2.1W
Citations:
7.3W