A solid polymer water electrolysis system utilizing natural circulation

Yoshinori Kobayashi

doi:10.1016/j.ijhydene.2014.07.153

Return

A solid polymer water electrolysis system utilizing natural circulation

2014-10-01

PRE

Yoshinori Kobayashi *

DOI：10.1016/j.ijhydene.2014.07.153

Original

Save

Abstract

En 中文

Solid Polymer Water Electrolysis (SPWE) is a method to efficiently produce high-purity hydrogen gas using a polymer electrolyte membrane-based system. SPWE systems that utilize natural water circulation (resulting from a difference in buoyancy) are a promising technology, which need no additional circulation pump for water supply to the electrolysis cells, and generate no pressure difference between the hydrogen generation and oxygen generation chambers. However, despite not needing an accurate pressure control, gas bubbles formed and trapped within the cell stacks can inhibit heat convection, leading to hot-spot formation and consequent destructive degradation. Improving the reliability is therefore one of the most important technological issues in natural circulation SPWEs. In this study, hot-spot formation is studied both by numerical heat and flow analysis, and by experimental in-situ visualization. This leads to insights into the degradation mechanisms of SPWE stacks, and their possible solutions. An improved design for an SPWE cell stack is successfully fabricated, and reliable operation up to 5000 h is demonstrated. Copyright (C) 2014, Hydrogen Energy Publications, LLC. Published by Elsevier Ltd. All rights reserved.

Keywords:

Solid polymer water electrolysis

Hydrogen generation system

Dynamic performance

Numerical analysis

Flow behavior