Return
A Wavelet-Based Adaptive Pole Assignment Method for Structural Control
DOI:10.1111/mice.12072.png)
Abstract
En 中文
This article presents a time varying wavelet-based pole assignment (WPA) method to control seismic vibrations in multi-degree of freedom (MDOF) structural systems. The discrete wavelet transform is used to determine the energy content over the frequency band of the response in real time. The frequency content was implemented in the Big Bang-Big Crunch algorithm to update the optimum values of the closed-loop poles of the structural system adaptively. To calculate optimum gain matrix, a robust pole placement algorithm was used. The gain matrix is calculated online based on response characteristic in real time and must not be calculated a priori (offline) choice. The WPA is tested on a 10-story structural system subject to several historical ground motions. It is observed that the WPA has advantages in some design problems. Numerical examples illustrate that the proposed approach reduces the displacement response of the structure in real time more than conventional linear quadratic regulator (LQR) controller.
Keywords:
TUNED-MASS DAMPERS
TIME-FREQUENCY LOCALIZATION
MEAN-SQUARE ALGORITHM
ACTIVE CONTROL
PARAMETER-IDENTIFICATION
PARALLEL ALGORITHMS
BUILDING STRUCTURES
VIBRATION CONTROL
SEISMIC RESPONSE
ROBUST-CONTROL
Journal
C
IF:
9.1
Papers:
2.0K
Citations:
1.3W
Organization
No organization information available

