.png){kind=icon}
.png){kind=icon}
Return
Achieving heterogeneous microstructure and enhanced strength-ductility synergy in Ti-6Al-4V titanium alloy via corrugated-flat rolling process
.png){kind=icon}
PRE
AI
赵
C
H
R
Z
H
Z
T
DOI：10.1016/j.msea.2025.148260.png)
.png){kind=icon}
Original request for help.png){kind=icon}
Share.png){kind=icon}
Save
Abstract
En 中文
It is an important way to realize the strengthening and toughening of titanium alloy materials by preparing multiscale microstructure. In this study, the heterostructures of lamellar coarse grains and equiaxed ultrafine grains were constructed in three plates with different microstructures by the corrugated-flat rolling process. Among them, with the help of the cyclic fluctuation load applied to the plates by the first pass of the corrugated roller, the effect of local grain refinement was realized, and the overall grain size was further refined by subsequent multi-pass flat rolling. The large-sized grains retained after corrugated rolling were stretched along the rolling direction to form short lamellar coarse grains. At the same time, the equiaxed ultrafine grains refined by the recrystallization mechanism exhibited random texture orientation, which weakened the overall texture strength of the plate. By constructing the heterostructure, the ultimate tensile strength of the plates were increased to 1205 MPa, 1215 MPa, and 1223 MPa, the fracture elongation were increased to 17 %, 15 %, and 14.8 %, respectively. Among them, the ultimate tensile strength of the plate with the best performance was 1215 MPa, and the elongation at break reached 15 %. The excellent strength-toughness matching of the plate was due to its unique micro-heterostructure, which allowed many geometrically necessary dislocations to be stored at the heterogeneous boundary, resulting in additional heterogeneous deformation-induced strengthening and hardening. The high strength of the plate could also be attributed to the synergistic strengthening of various strengthening mechanisms such as fine grain strengthening and dislocation strengthening.
Keywords:
Corrugated-flat rolling
Ti-6Al-4V alloy
Heterogeneous microstructure
Geometrically necessary dislocations
Mechanical properties
Journal
M
IF:
7
Papers:
3.7W
Citations:
13.8W
Organization
No organization information available
Cited Papers