.png){kind=icon}
.png){kind=icon}
Return
Active diffusers: some prototypes and 2D measurements
.png){kind=icon}
OA
AI
DOI：10.1016/j.jsv.2004.08.031.png)
.png){kind=icon}
.png){kind=icon}
Share.png){kind=icon}
Save
Abstract
En 中文
Diffusing devices are used to improve room acoustics in a wide variety of applications. The dispersion generated by current diffuser technologies is often limited to mid-to-high frequencies because low-frequency diffusers are usually too large to be easily accommodated. To extend the bandwidth of diffusers to a lower frequency a new approach is proposed, that is to use active control technology. In particular, active impedance techniques have been exploited to create non-absorbing diffusers, and hybrid structures that partly absorb while dispersing any reflected sound. This paper presents results mostly from a feedforward structure. It is found that achieving active dispersion without absorption other a worthwhile bandwidth can be more difficult than achieving active absorption due to the more complex target impedance that the controller needs to learn. Measurements on polar responses provide evidence that the active diffusers can achieve wider bandwidth dispersion. Boundary element modelling has enabled the design of these structures to be examined in more application-realistic set-ups. (c) 2004 Elsevier Ltd. All rights reserved.
Keywords:
SOUND-ABSORPTION
SCATTERING
AI Summary
Key information extracted from the uploaded paper, including a brief overview, abstract, background, key highlights, visual analysis, and future outlook.
Journal
IF:
4.9
Papers:
1.7W
Citations:
4.8W
Organization
No organization information available