.png){kind=icon}
.png){kind=icon}
Return
An LDPC-Coded SCMA Receiver With Multi-User Iterative Detection and Decoding
.png){kind=icon}
PRE
AI
DOI：10.1109/TCSI.2019.2925826.png)
.png){kind=icon}
Original request for help.png){kind=icon}
Share.png){kind=icon}
Save
Abstract
En 中文
This paper presents the first low-complexity realization of an LDPC-code sparse code multiple access (SCMA) receiver with a high-throughput LDPC decoder and a multi-mode SCMA detector. The minimum mean-square error with parallel interference cancellation (MMSE-PIC) algorithm is adopted in the SCMA detection. The modified user-node operations in the MMSE-PIC-based message-passing detector improve the convergence rate in error performance. The proposed receiver also supports multi-user iterative detection and decoding (MU-IDD) to improve the error rate performance. The proposed receiver supports both 4x6 and 8x12 SCMA systems. The proposed MU LDPC decoder has a 57.1% lower hardware complexity than the direct-mapped design that is achieved through hardware sharing and memory access scheduling. Designed in a 40-nm CMOS technology, the SCMA receiver integrates 10.9M logic gates in an area of 3.382 x 3.382 mm(2). The proposed design achieves a gross throughput of 1.198 Gb/s and 599 Mb/s for 8 x 12 and 4 x 6 SCMA systems, respectively, under a practical situation. It dissipates 813 mW at a clock frequency of 300 MHz from a 0.9-V supply.
Keywords:
Sparse code multiple access (SCMA)
low-density parity-check (LDPC)
iterative detection-and-decoding (IDD)
fifth-generation (5G) communication
CMOS digital integrated circuits
AI Summary
Key information extracted from the uploaded paper, including a brief overview, abstract, background, key highlights, visual analysis, and future outlook.
Journal
IF:
5.2
Papers:
9.7K
Citations:
2.2W