.png){kind=icon}
.png){kind=icon}
Return
An Urban-Oriented Method for Tree Canopy Height Extraction Using ICESat-2 Data
.png){kind=icon}
OA
AI
DOI：10.3390/rs18152510.png)
.png){kind=icon}
Original request for help.png){kind=icon}
Share.png){kind=icon}
Save
Abstract
En 中文
Urban forests play a crucial role in sustaining habitable urban environments, and tree canopy height (TCH) is a key parameter for characterizing urban forest structure and ecological functions. However, accurate TCH retrieval using spaceborne lidar remains challenging in urban built-up areas because of the high spatial heterogeneity of urban land cover. This study proposes an urban-oriented method for ICESat-2 data processing and TCH extraction and evaluates it in Peoria, Illinois, USA. By integrating spectral constraints with photon spatial distribution patterns, the method further separates non-ground photons into vegetation photons and building photons. Individual tree crown polygons are then introduced as spatial constraints for TCH extraction, helping to overcome the limitations of regular grids in representing both the laser footprint scale and fine urban landscape detail. In addition, a non-exclusive photon-to-crown assignment strategy based on energy weighting allowed each photon to contribute to multiple crowns in proportion to the footprint energy intercepted by each crown. Among the 1391 crowns associated with vegetation photons, 286 met the thresholds for both total and high-weight photon counts and were retained for accuracy assessment. Validation against canopy heights derived from airborne laser scanning (ALS) reference data shows that the proposed method achieves an R2 of 0.55 and an RMSE of 2.71 m. Further analysis indicates that retrieval accuracy is primarily controlled by beam strength: strong beams yield higher accuracy (R2 ≈ 0.60), whereas daytime and nighttime observations differ only slightly. Overall, after targeted processing, ICESat-2 can provide a set of individual tree canopy height samples in urban built-up areas, which may support local calibration and serve as potential labels for subsequent regional canopy height mapping.
Keywords:
ICESat-2
photon-counting lidar
urban forest
classification
tree canopy height