Return
Antenna Array Calibration Using a Sparse Scene
DOI:10.1109/OJAP.2021.3061935.png)
Abstract
En 中文
In radar systems, antenna arrays acquire direction-dependent information to localize targets or create images of the environment. However, because of unknown complex amplitudes per channel and mutual coupling, a calibration is necessary for good performance. Common calibration approaches measure to targets under known angles in a multipath-free far-field environment, which often can only be provided by anechoic chambers. Therefore, this process is not suitable for low-cost and frequent calibration. To overcome these limitations, this paper proposes a novel calibration approach using an unknown but sparse target scene. Multiple measurements at known relative positions of the radar are combined to a synthetic aperture. Then, the full mutual coupling matrix is estimated simultaneously with the unknown target scene. The method requires neither target position information, far-field conditions, nor an anechoic chamber because multipath propagation can be suppressed easily for targets located in the near-field. The proposed calibration approach is validated by measurements of a commercial 77GHz radar. The performance is evaluated by comparing the achieved image quality using the calibration results of this work and the radar's ex-factory calibration data. The proposed novel calibration procedure improves the image quality, while considerably lowering the demands on the calibration measurements and environment.
Keywords:
Antenna measurements
Mutual coupling
Anechoic chambers
Radar antennas
Calibration
Synthetic aperture radar
Antenna arrays
Antenna array
calibration
compressed sensing
mutual coupling
radar
sparsity
AI Summary
Key information extracted from the uploaded paper, including a brief overview, abstract, background, key highlights, visual analysis, and future outlook.
Journal
I
IF:
3.6
Papers:
803
Citations:
1.6K

