Bidirectional flow micropump based on dynamic rectification

Pei Song Chee

doi:10.1016/j.sna.2013.09.033

Return

Bidirectional flow micropump based on dynamic rectification

2013-12-01

PRE

DOI：10.1016/j.sna.2013.09.033

Original

Original request for help

Save

Abstract

En 中文

This paper proposes a new bidirectional pumping principle based on a dynamic rectification mechanism. The pump is composed of a moveable actuation platform and a gourd-shaped chamber, whose role is to behave as both a rectification and a pumping structure. An asymmetrically deflected membrane induces a differential pressure across the chamber and thus generates a pumping effect. The stream flow field inside the chamber was verified by numerical simulations. Furthermore, the feasibility of the pump was examined by developing a poly-dimethylsiloxane (PDMS)-based prototype using micro-electromechanical (MEMS) fabrication technology. Because the pumping performance is directional, the micropump characteristics were evaluated at different actuation points along the membrane. In addition, the operating performance was assessed over a range of low driving frequencies (1-10 Hz, in 1 Hz increments) and over a nominal frequency ranges (5-55 Hz, in 5 Hz increments). The proposed micropump exhibits maximum flow rates of 1.52 ml/min in the forward direction and 1.48 ml/min in the reverse direction, with resonance frequencies of 15 Hz and 20 Hz, respectively. The presented pump offers advantage in future disposable microfluidics applications due to its bi-directional properties, low fabrication cost and modular architecture. (C) 2013 Elsevier B.V. All rights reserved.

Keywords:

Bi-directional micropumps

Dynamic structure valve

Electromagnetic actuation

Numerical simulation

AI Summary

Key information extracted from the uploaded paper, including a brief overview, abstract, background, key highlights, visual analysis, and future outlook.