.png){kind=icon}
Return
Boosting and Robust Multifunction Cathode Layer for Solid Oxide Fuel Cells
.png){kind=icon}
PRE
AI
DOI：10.1021/acssuschemeng.2c01383.png)
.png){kind=icon}
Original request for help.png){kind=icon}
Share.png){kind=icon}
Save
Abstract
En 中文
Designing an efficient cathode and an accelerating sluggish oxygen reduction reaction (ORR) process are crucial to enhancing electrochemical outputs for solid oxide fuel cells (SOFCs). A novel multifunction layer (MFL) cathode that combines the Gd0.2Ce0.8O2-delta (GDC) interlayer with a La0.6Sr0.4Co0.2Fe0.8O3-delta (LSCF) cathode functional layer is reported. After precisely controlling the concentration of an infiltration precursor solution, discrete and filmy LSCF on the GDC scaffold (MFL-D and MFL-F) can be prepared. Compared with the discrete-coating of LSCF (MFL-D), the film-like coating of LSCF (MFL-F) exhibits a lower initial polarization impedance of 0.093 Omega cm(2) at 750 degrees C. The as-obtained SOFCs produce an enhanced peak power density of 0.93 W cm(-2) and have successfully been operated at 0.5 A cm(-2) for 400 h with a voltage degradation of only 16 mV. Oxygen ion transport model of the MFL-F is constructed and discussed. This work provides an important insight into designing efficient cathode for SOFCs.
Keywords:
Solid oxide fuel cells
Function layer
Cathode
Infiltration
Stability
Journal
IF:
7.3
Papers:
1.7W
Citations:
10.7W
Organization
Cited Papers
ShareSave
ShareSaveShareSaveShareSaveNano-tailoring of infiltrated catalysts for high-temperature solid oxide regenerative fuel cells.png)
NANO ENERGY
NANO ENERGYIF17.1
PREAI
ShareSaveShareSaveGlobal investigation of the influence of the phase of subharmonic excitation of a driven system
PREAI
ShareSaveShareSave
View more