.png){kind=icon}
.png){kind=icon}
Return
Bubble refinement by non-invasive rotating flow
.png){kind=icon}
PRE
AI
DOI：10.1016/j.ces.2021.116908.png)
.png){kind=icon}
Original request for help.png){kind=icon}
Share.png){kind=icon}
Save
Abstract
En 中文
Gas-liquid flow widely exists in industrial processes. Bubble refinement is of importance because smaller bubbles lead to higher efficiency of the gas-liquid interaction. Here, the novel rotating flow is designed for bubble refinement without using invasive parts. The drag force along the flow direction and the addi-tional shear-lift force applied on the mother bubble allow it to detach from the orifice more easily with smaller size. In addition, the non-invasive rotating flow generates a large velocity gradient in both the shear and normal directions, resulting in turbulent shear and normal stress, causing the rising mother bubbles to break up in either the shear or normal direction. As a result, the number of bubbles increases to 408 compared to 9 under the static condition. Approximately 50% of the bubbles in the liquid are less than 3.60 mm in size and the Sauter mean bubble diameter is reduced from 10.45 to 4.77 mm, a decrease of 54.41%. The bubble refinement mechanism in the non-invasive rotating flow applies to other occasions where no invasive parts are needed. (c) 2021 Elsevier Ltd. All rights reserved.
Keywords:
Bubble refinement
Rotating flow
Bubble size
Number of bubbles
Non-invasive method
Journal
IF:
4.3
Papers:
2.2W
Citations:
5.5W