.png){kind=icon}
.png){kind=icon}
Return
Common-Path Dual-Comb Spectroscopy Using a Single Electro-Optic Modulator
.png){kind=icon}
OA
AI
DOI：10.1109/JLT.2020.2998372.png)
.png){kind=icon}
.png){kind=icon}
Share.png){kind=icon}
Save
Abstract
En 中文
Dual frequency comb (DFC) spectroscopy using electro-optic comb generators stands out for its flexibility, easy implementation, and low cost. Typically, two combs with different line spacing are generated from a common laser using independent electro-optic comb generators. This approach minimizes the impact of laser phase noise; however, the distinct paths followed by the two combs ultimately limit the attainable signal-to-noise ratio and long-term stability of the system. In this work, a common-path DFC is generated using a single modulator driven by an arbitrary waveform generator, thus enabling a remarkable increase of the system stability (up to 0.8 s of integration time) while maintaining high flexibility. The proposed technique is experimentally validated by implementing a dual frequency comb with 3000 lines, covering an optical bandwidth of 4.5 GHz, and demonstrating an optical-to-radiofrequency compression factor of 7500. Our system is able to measure extremely narrowband optical features (in the MHz range) with an accuracy only limited by the master laser stability.
Keywords:
Optical interferometry
Optical filters
Optical saturation
Frequency modulation
Electrooptic modulators
Arbitrary waveform generation
brillouin scattering
dual comb spectroscopy
optical frequency combs
AI Summary
Key information extracted from the uploaded paper, including a brief overview, abstract, background, key highlights, visual analysis, and future outlook.
Journal
IF:
4.8
Papers:
1.7W
Citations:
3.8W
View more organizations