.png){kind=icon}
Return
Compact switchable filter with three state modes using simple microstrip structure
.png){kind=icon}
PRE
AI
DOI：10.1002/mop.33253.png)
.png){kind=icon}
Original request for help.png){kind=icon}
Share.png){kind=icon}
Save
Abstract
En 中文
AbstractThis paper presents a compact multifunctional reconfigurable filter based on double coupled‐line structures with three different filtering modes. Three different working modes of the wideband bandpass filter (BPF), bandstop filter (BSF) and wideband filter with single notch can be switched. One prototype of the reconfigurable filter is constructed and measured. For the wideband BPF mode, the 3‐dB bandwidth is 84.5%with in‐band return loss (RL) higher than 21.5 dB and minimum insertion losses (IL) of 0.9 dB, and rejections for the upper stopband is higher than 22.5 dB. For the wideband filter with single notch mode, the 3‐dB bandwidth is 39.7% and 24.9%, with the minimum in‐band IL of 1.13 dB and 1.5 dB, respectively. The maximum rejections between the two bands are 32 dB, and the upper stop band rejections are higher than 19 dB. For the BSF mode, the 3‐dB bandwidth is 29.6%.
Journal
No journal information available
Organization
No organization information available
Cited Papers
No cited papers available