.png){kind=icon}
Return
Component and system reliability-based topology optimization using a single-loop method
.png){kind=icon}
PRE
AI
DOI：10.1007/s00158-009-0401-5.png)
.png){kind=icon}
Original request for help.png){kind=icon}
Share.png){kind=icon}
Save
Abstract
En 中文
We perform reliability-based topology optimization by combining reliability analysis and material distribution topology design methods to design linear elastic structures subject to random inputs, such as random loadings. Both component reliability and system reliability are considered. In component reliability, we satisfy numerous probabilistic constraints which quantify the failure of different events. In system reliability, we satisfy a single probabilistic constraint which encompasses the component events. We adopt the first-order reliability method to approximate the component reliabilities and the inclusion-exclusion rule to approximate the system reliability. To solve the probabilistic optimization problem, we use a variant of the single loop method, which eliminates the need for an inner reliability analysis loop. The proposed method is amenable to implementation with existing deterministic topology optimization software, and hence suitable for practical applications. Designs obtained from component and system reliability-based topology optimization are compared to those obtained from traditional deterministic topology optimization and validated via Monte Carlo simulation.
Keywords:
Topology optimization
Component reliability
System reliability
Random loads
Single-loop method
Journal
IF:
4
Papers:
4.9K
Citations:
1.7W
Organization
Cited Papers
.png){kind=icon}
ShareSave
ShareSaveShareSaveShareSaveShareSave
View more