Return
Cubic garnet solid polymer electrolyte for room temperature operable all-solid-state-battery
DOI:10.1016/j.jmrt.2021.11.055.png)
Abstract
En 中文
Solid polymer electrolytes are promising candidates for implementation in next-generation all-solid-state batteries (ASSBs) which could replace conventional batteries used today. However, the materialization of ASSBs on a mass scale is restricted by the low ionic conductivity and high interfacial resistance of solid electrolytes. In this work, succinonitrile (SN) with lithium (trifluoromethylsulphonyl)imide (LiTFSI) and Al-doped Li7La3Zr2O12 (Al-LLZO) nanoparticles were used to improve the ionic conductivity of a polyethylene oxide-based composite electrolyte. The Al-LLZO nanoparticles were synthesized by a facile synthesis process at low temperatures, which contributed to an enhancement in the ionic conductivity. A solid polymer electrolyte with 7.5 wt% of Al-LLZO and 15 wt% of SN achieved a high ionic conductivity of 4.17 x 10(-4) Scm(-1) at room temperature and a large value of 0.451 for the lithium-ion transport number at 60 degrees C. By adding 10 wt% SN and 10 wt% of Al-LLZO in the LiFePO4 cathode, the cell could operate at 25 degrees C with a specific capacity of 130 mAh g(-1) and 89% capacity retention after 200 cycles at current density of 20 mA g(-1). This study therefore proposes a solution to improve the ionic conductivity of solid polymer electrolytes in all-solid-state batteries. (c) 2021 The Author(s). Published by Elsevier B.V. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).
Keywords:
All-solid-state
Solid polymer electrolytes
Cubic garnet llzo
Lithium-ion battery
Succinonitrile
AI Summary
Key information extracted from the uploaded paper, including a brief overview, abstract, background, key highlights, visual analysis, and future outlook.
Journal
IF:
6.6
Papers:
1.7W
Citations:
6.8W

