.png){kind=icon}
.png){kind=icon}
Return
Demonstrating scalability between two blender types using DEM
.png){kind=icon}
PRE
AI
DOI：10.1016/j.ijpharm.2024.124773.png)
.png){kind=icon}
Original request for help.png){kind=icon}
Share.png){kind=icon}
Save
Abstract
En 中文
Powder blending is a critical step in pharmaceutical manufacturing that can impact product quality such as tablet tensile strength. This study utilized the Discrete Element Method (DEM) to investigate blending in a 5-liter mini-batch and a 2-liter Turbula blender. DEM parameters were calibrated using small-scale powder characterization tests, so that the particle behavior in the DEM simulations matches the measured behavior. The research explored the effects of blender designs and process conditions on blending and lubricant dispersion. A predictive model for tablet tensile strength was developed. The model takes the lubricant's dispersion via the lubrication energy into account. The model is then used to predict the tablet tensile strength depending on the chosen process parameters, blending speed, duration, and fill level. DEM simulations enabled scaling between the two blenders, providing valuable insights for a semi-continuous manufacturing process based on mini-batch blending. The findings contribute to a deeper understanding of blending mechanics, offering potential enhancements in pharmaceutical manufacturing efficiency and product consistency.
Keywords:
SCALE-UP MODEL
POWDER FLOW
SIMULATION
VALIDATION
FEEDER
DESIGN
IMPACT
SHEAR
Journal
IF:
5.2
Papers:
2.2W
Citations:
6.7W