.png){kind=icon}
.png){kind=icon}
Return
Development and Mechanical Properties of Ceramic-Reinforced Hypoeutectic Al Alloy Functionally Graded Materials Produced by Centrifugal Casting: A Machine Learning-Enhanced Constitutive Modeling Approach
.png){kind=icon}
PRE
AI
M
B
D
K
M
B
M
DOI：10.1134/S1067821225601170.png)
.png){kind=icon}
Original request for help.png){kind=icon}
Share.png){kind=icon}
Save
Abstract
En 中文
This study presents a systematic investigation of ceramic-reinforced AlSi10 functionally graded materials through optimized centrifugal casting combined with machine learning-enhanced constitutive modeling. Processing parameters were systematically optimized using twelve experimental specimens with rotation speeds of 600, 1200 and 1800 rpm, with 1200 rpm yielding consistent compositional gradients within the investigated rotational range. Characterization focused on Al2O3, graphite, and SiC reinforcements at 1.26 wt % loading under controlled conditions (400 degrees C mold temperature, 850 degrees C casting temperature). Spatial hardness mapping confirmed the formation of functionally graded microstructure with maximum gradients of 1.34 HV/mm, demonstrating effective density-driven particle segregation. Graphite reinforcement achieved optimal performance with 177.4 MPa ultimate tensile strength and 24.9% elongation, representing 14.8 and 13.1% improvements over the matrix. Machine learning algorithms were employed for constitutive parameter identification, with the Hockett-Sherby formulation providing close fits to experimental flow curves (R2 = 0.998). This approach provides baseline data for FGM process-property relationships for aluminum-silicon based functionally graded components.
Keywords:
functionally graded materials
AlSi10 aluminum alloy
centrifugal casting
constitutive modeling
mechanical characterization
ceramic reinforcement
Journal
R
IF:
0.9
Papers:
37
Citations:
0
Organization
Cited Papers