.png){kind=icon}
.png){kind=icon}
Return
Differential Sensors Using Microstrip Lines Loaded With Two Split-Ring Resonators
.png){kind=icon}
PRE
AI
DOI：10.1109/JSEN.2018.2840691.png)
.png){kind=icon}
Original request for help.png){kind=icon}
Share.png){kind=icon}
Save
Abstract
En 中文
This paper presents a microwave sensor using a pair of split-ring resonators (SRRs). The sensor is designed by loading a microstrip transmission line by two identical SRRs on its sides. Differential permittivity sensing is performed by loading the SRRs with dielectric samples. One transmission notch is observed for the identical loads, whereas the non-identical samples produce two split notches. The sensor's operating principle is described through a circuit model analysis. A prototype of the designed sensor is fabricated and experimentally validated for verifying the differential sensing concept. The developed device can be used to compare or differentially characterize solid dielectric samples improving the robustness to environmental factors producing cross-sensitivity or miscalibration.
Keywords:
Differential measurement
metamaterial-inspired sensor
microwave sensor
split-ring resonator
AI Summary
Key information extracted from the uploaded paper, including a brief overview, abstract, background, key highlights, visual analysis, and future outlook.
Journal
IF:
4.5
Papers:
2.1W
Citations:
7.3W
Organization
No organization information available