.png){kind=icon}
.png){kind=icon}
Return
Distributed feedback lasers using surface gratings in Bragg waveguides
.png){kind=icon}
PRE
AI
DOI：10.1364/OL.431292.png)
.png){kind=icon}
Original request for help.png){kind=icon}
Share.png){kind=icon}
Save
Abstract
En 中文
This Letter presents, to the best of our knowledge, the first report of a narrow-linewidth similar to 790-800 nm edge-emitting semiconductor distributed feedback Bragg reflection waveguide diode laser ((DFBRL)-R-2). The DFB(2)RLs were fabricated using a ridge waveguide structure with 5th order, surface-etched grating forming the wavelength selective element. Unbonded devices with a 500 pm cavity length exhibited continuous wave threshold currents in the region of 25 mA with an output power of 2.5 mW per (uncoated) facet at 100 mA drive current. The devices operated in a single longitudinal mode, with side-mode suppression ratio (SMSR) as high as 49 dB and linewidths as low as 207 kHz. Devices maintained single mode operation with high SMSR over a 9 nm wavelength range as the temperature was swept from 15 degrees C to 50 degrees C. (C) 2021 Optical Society of America
Keywords:
HIGH-POWER