.png){kind=icon}
.png){kind=icon}
Return
Dry grinding process with workpiece precooling
.png){kind=icon}
PRE
AI
DOI：10.1016/j.cirp.2015.04.098.png)
.png){kind=icon}
Original request for help.png){kind=icon}
Share.png){kind=icon}
Save
Abstract
En 中文
This paper proposes a workpiece cooling prior to grinding in order to allow a dry processing. Tests and simulation showed good potential. The obtained part quality is good, and there is no thermal damage since there is a higher heat flux from the grinding zone to the workpiece due to the much lower temperature of the last. The process design is a key task for good results and should include a precise determination of the cooling conditions that allow the grinding cycle heating to bring the part temperature close to the environment at the end of spark-out. (C) 2015 CIRP.
Keywords:
Grinding
Temperature
Sustainable machining
AI Summary
Key information extracted from the uploaded paper, including a brief overview, abstract, background, key highlights, visual analysis, and future outlook.
Journal
C
IF:
3.6
Papers:
3.4K
Citations:
1.3W
