.png){kind=icon}
.png){kind=icon}
Return
Durable nitrate sensor by surface modification
.png){kind=icon}
PRE
AI
DOI：10.1016/j.surfcoat.2016.04.052.png)
.png){kind=icon}
Original request for help.png){kind=icon}
Share.png){kind=icon}
Save
Abstract
En 中文
This work presents the development of nitrate sensor based on Ion Sensitive Field Effect Transistor (ISFET) technology to achieve longer device's lifetime. This lifetime depended on the adhesion of PVC ion-selective membrane on the Si3N4 sensing membrane of ISFET. The adhesion level directly affected the leaching of plasticizer. Such improvement utilized surface modification techniques by immersing the sensing membrane in the solution of 5% 3-mercaptopropyl-trimethoxysilane (MPTMS)/methanol. The modified surface was detected through the change of hydrophobicity and thickness of MPTMS using the contact angle measurement and ellipsometry techniques. The appropriate time for immersion was 18 h. The modified surface achieved the optimal hydrophobicity with contact angle of 100.32 degrees. The presence of MPTMS film was confirmed by detecting the thiol-group using Fourier Transform Infrared (FTIR) spectrophotometry and Auger Electron Spectroscopy (AES). The PVC ion selective membrane was then immobilized on the surface to create nitrate sensors with the following characteristics. The Nitrate-Nitrogen detection limit = 2.44 ppm with linear range from 5 to 60 ppm at sensitivity of 56 mV/dec. (R-2 = 1). The response time was 90 s. Finally, this nitrate sensor could extend the total utilization lifetime from 8 to 17 weeks. (C) 2016 Elsevier B.V. All rights reserved.
Keywords:
PVC ion-selective membrane
Si3N4 sensing membrane
Plasticizer
Surface modification
Chemical liquid phase
Journal
IF:
6.1
Papers:
2.8W
Citations:
7.1W
View more organizations