.png){kind=icon}
.png){kind=icon}
Return
Electrically Powered High-Salinity Brine Separation Using Dimethyl Ether
.png){kind=icon}
PRE
AI
DOI：10.1021/acs.iecr.4c00517.png)
.png){kind=icon}
Original request for help.png){kind=icon}
Share.png){kind=icon}
Save
Abstract
En 中文
Dewatering highly saline aqueous streams, from mining and geothermal leachates to industrial wastewater, is essential for effective resource recovery and safe disposal. Membraneless water extraction (MWE) uses a low-polarity solvent to separate water from concentrated aqueous solutions. In this study, we design a new MWE that uses dimethyl ether (DME) to selectively extract water from high-salinity brines, leveraging the volatility of DME to achieve rapid solvent recovery. By separating water and dissolved salts at a liquid-liquid interface, MWE minimizes the deleterious effects of scaling on vulnerable membrane and heat exchanger surfaces, reducing the need for extensive pretreatment and expensive materials. We begin by developing a computational framework for a multistage counterflow liquid-liquid contactor, which extracts water into DME, coupled with a multistage solvent regenerator that uses vapor compression to efficiently separate the desalinated water from the DME extractant. Excess Gibbs free energy and equation of state frameworks are used to model fluid phase equilibria in water-DME-sodium chloride (NaCl) mixtures, with interaction parameters estimated from experimental data. Incorporating equilibrium calculations into a system-scale computational model, we examine the performance of MWE using DME for the first time. Our analysis demonstrates that MWE can concentrate seawater desalination brine (>1.0 mol(NaCl) kg(-1)) to zero-liquid discharge salinities, with an energy consumption of under 50 kW h per m(3) of water extracted with a solvent recovery ratio greater than 99.9%. We highlight the importance of staging the vapor compression process to simultaneously minimize energy consumption while enabling brine concentration and product water solvent contamination. The thermodynamic framework developed here allows for the robust evaluation of new MWE solvents and systems for critical brine concentration and fractional precipitation applications.
Keywords:
SODIUM-CHLORIDE SOLUTIONS
VAPOR-LIQUID-EQUILIBRIUM
ACTIVITY-COEFFICIENT
SALTING-OUT
REVERSE-OSMOSIS
METHYL-CHLORIDE
AREA METHOD
SOLVENT
PHASE
WATER
Journal
I
IF:
3.9
Papers:
4.0W
Citations:
9.6W