Electromagnetically driven liquid iris

doi:10.1016/j.sna.2014.07.004

Electromagnetically driven liquid iris

2015-07-01

21

PRE

AI

DOI：10.1016/j.sna.2014.07.004

Original

Original request for help

Save

Abstract

En 中文

This paper presents a tunable liquid iris based on electromagnetic actuation for miniature cameras in mobile devices such as smart phones and pads. To investigate the effect of a magnetic field on a ferrofluid, contact angle modification and transportation of a sessile ferrofluid droplet are tested using a neodymium magnet and an electric coil. The variation in the contact angle of the ferrofluid droplet is 21.3 degrees for the neodymium magnet and 18.1 degrees for the electric coil. In addition, transportation of the ferrofluid droplet is also demonstrated using the neodymium magnet and the electric coil. As a proof of concept, a pretest of a tunable iris operated by electromagnetic actuation is conducted by using a hollow cylinder cell. Initially, the ferrofluid is in a relaxed state, so the cylinder cell shows the largest aperture (4.06 mm). When an electric current is applied to an electric coil wound around the outside of the cylinder cell, the ferrofluid, which is initially placed in the hydrophobic sidewall inside the cylinder cell, is actuated and pulled to the center. The aperture diameter under the applied current is modified from 4.06 mm at 0 A to 3.21 mm at 2.0 A. Finally, a tunable iris, consisting of two connected circular microchannels, is realized using MEMS technology. The iris size is 9 mm x 9 mm x 2 mm, and the aperture diameter can be varied from 1.72 mm at 0A to 1.09 mm at 2.6A. The response times of the iris for actuation and relaxation are measured by a high-speed camera and found to be 250 ms and 450 ms, respectively. (C) 2014 Elsevier B.V. All rights reserved.

Keywords:

Variable lens

Liquid lens

Optical aperture

Miniature camera

Electromagnetically driven liquid iris

Abstract

AI Summary

Journal

Organization

Cited Papers