Engineered zero-dispersion microcombs using CMOS-ready photonics

doi:10.1364/OPTICA.478710

Engineered zero-dispersion microcombs using CMOS-ready photonics

2023-02-15

19

OA

AI

DOI：10.1364/OPTICA.478710

Original

Original request for help

Save

Abstract

En 中文

Normal group velocity dispersion (GVD) microcombs offer high comb line power and high pumping efficiency compared to bright pulse microcombs. The recent demonstration of normal GVD microcombs using CMOS foundry-produced microresonators is an important step toward scalable production. However, the chromatic dispersion of CMOS devices is large and impairs the generation of broadband microcombs. Here, we report the development of a microresonator in which GVD is reduced due to a coupled-ring resonator configuration. Operating in the turnkey self-injection locking mode, the resonator is integrated in a hybrid manner with a semiconductor laser pump to produce high-power efficiency combs spanning a bandwidth of 9.9 nm (1.22 THz) centered at 1560 nm, corresponding to 62 comb lines. Fast, linear optical sampling of the comb waveform is used to observe the rich set of near-zero GVD comb behaviors, including soliton molecules, switching waves (platicons), and their hybrids. Tuning of the 20 GHz repetition rate by electrical actuation enables servo locking to a microwave reference, which simultaneously stabilizes the comb repetition rate, offset frequency, and temporal waveform. This integrated hybrid system could be used in coherent communications or for ultrastable microwave signal generation by two-point optical frequency division. (c) 2023 Optica Publishing Group under the terms of the Optica Open Access Publishing Agreement

Keywords:

FREQUENCY COMBS

RESONATOR

Engineered zero-dispersion microcombs using CMOS-ready photonics

Abstract

Journal

Organization