.png){kind=icon}
.png){kind=icon}
Return
Experimental demonstration of a dual-input/dual-output reflective impedance metasurface
.png){kind=icon}
PRE
AI
DOI：10.1063/5.0169413.png)
.png){kind=icon}
Original request for help.png){kind=icon}
Share.png){kind=icon}
Save
Abstract
En 中文
This paper presents the experimental demonstration of a dual-input/dual-output reflective impedance metasurface. The design of the metasurface relies on the Method of Moments and leverages auxiliary surface waves to achieve anomalous reflection of two impinging plane waves with controlled sidelobe levels. The two beams are chosen independently compared to those in a conventional phase-gradient metasurface where the design presents a single slope to achieve a certain reflection and all other incident beams would depend on that slope. A prototype that ensures maximum directivity at two prescribed reflection angles for the two input waves is then fabricated on a Rogers RO3003 printed-circuit board using 42 metawires loaded with printed capacitors. The proposed metasurface is capable of reflecting an incident beam from -20 degrees to -55 degrees and a second from +10 degrees to 50 degrees at 9.93 GHz. The metasurface is experimentally characterized and an illumination efficiency of at least 89% is calculated for each of the reflected waves, indicating a high multiplexing efficacy.