Extrusion parameter control optimization for DIW 3D printing using image analysis techniques

Max J. Sevcik

doi:10.1007/s40964-023-00470-3

Extrusion parameter control optimization for DIW 3D printing using image analysis techniques

2023-06-17

6

PRE

AI

DOI：10.1007/s40964-023-00470-3

Original

Original request for help

Save

Abstract

En 中文

Material extrusion is a well-recognized facet of additive manufacturing that involves the fabrication of parts through the deposition of structural material from an extrusion head from a bulk supply. In the subdivision of Direct Ink Writing (DIW) additive manufacturing, challenges arise when the structural material is flowable, synchronous extrusion control and tool movement becomes critical for achieving high-quality parts with low defect populations. DIW techniques are most used in laboratory settings using expensive custom instruments and may require specialized 3D slicing software. In this study, the fabrication of an inexpensive, consumer-friendly progressive cavity pump dispensing system is detailed, in which can create high-quality parts by executing G-code commands produced from a commercial slicing software. The precision and repeatability of the movement-synchronized material extrusion is demonstrated through a series of optimization schemes, entailing the alteration of various control parameters, which directly affect the extrusion properties demonstrated during a print. In situ diagnostics were implemented to evaluate the results of the established optimization experiment. Using a machine vision technique, images of the optimization prints are processed. Following this, a supervised machine learning model was trained to autonomously judge whether or not the extrusion parameters produced a passing or failing result. The machine learning scheme serves as a preliminary benchmark for future layer-by-layer evaluation of more complex DIW parts. The construction of the printer and development of in situ characterization capabilities demonstrates the ability for this printer to create high-fidelity DIW parts for a fraction of the price of other systems.

Keywords:

Material extrusion

Direct-ink-write

Part fidelity

Image analysis

Process optimization

In situ quality control

Extrusion parameter control optimization for DIW 3D printing using image analysis techniques

Abstract

Journal

Organization