.png){kind=icon}
.png){kind=icon}
Return
Fabrication and mechanical properties of multi-walled carbon nanotubes/epoxy nanocomposites
.png){kind=icon}
PRE
AI
M
T
N
DOI：10.1016/j.msea.2006.09.138.png)
.png){kind=icon}
Original request for help.png){kind=icon}
Share.png){kind=icon}
Save
Abstract
En 中文
Carbon nanotubes have better physical and mechanical behavior than the traditional materials. In this study, the multi-walled carbon nanotubes (MWNTs) were added to the epoxy resin as a reinforcement to fabricate MWNTs/epoxy nanocomposites. The pressure and temperature were applied to cure the MWNTs/epoxy compound by hot press method. Mechanical properties such as tensile strength, Young's modulus, and Poisson's ratio were measured. The effect of weight percentages of the MWNTs was investigated. Morphologies of the fracture surface of MWNTs/epoxy nanocomposites were observed by scanning electron microscope. (C) 2007 Elsevier B.V. All rights reserved.
Keywords:
nanocomposites
carbon nanotubes
mechanical property
Journal
M
IF:
7
Papers:
3.7W
Citations:
13.8W
Organization
Cited Papers