arrow
Return

Flow optimization in a microchannel with vortex generators using genetic algorithm

delete2022-01-01
delete43
PRE
AI
A
Alişan Gönül *
A
Abdülkerim Okbaz
N
Nurullah Kayacı
A
Ahmet Selim Dalkılıç
DOI:10.1016/j.applthermaleng.2021.117738delete
deleteOriginal
deleteOriginal request for help
deleteShare
deleteSave
Abstract

Abstract

En 中文
In this study, delta winglet-type vortex generators, widely used in conventional macro channels and proven to be effective, are used in microchannels to increase their heat transfer capacities. The effects of vortex generators on heat transfer and pressure loss characteristics are studied numerically for different angles of attack, vortex generator arrangement type, the transverse and longitudinal distance between vortex generators, vortex generator length and height, and different Reynolds numbers. The thermal and hydraulic characteristics are presented as the Nusselt number, the friction factor, and the performance evaluation criteria number (PEC) that takes into account the heat transfer enhancement and the corresponding increase in pressure loss. The variation of Nu/Nu0, f/f0, and PEC are found to be in the range of 1.03-1.87, 1.04-1.8, and 0.92-1.62, respectively. A multi-objective optimization study are performed with the response surface methodology analysis to see how different parameters affect heat transfer and pressure loss and to determine the most optimum design. Besides, local sensitivity analysis study is carried out through the RSM, and water inlet velocity for heat transfer enhancement is found to be the most effective parameter. Among the geometric parameters, vortex generator height is determined as the most effective factor. Finally, practical Nusselt number and friction factor correlations taking many parameters into account are proposed to be able to compare the results of other researchers, and for engineers designing microchannel cooling systems.
Keywords:
Microchannel
Vortex generator
Heat transfer enhancement
Genetic algorithm
Multi-objective optimization

Journal

Applied Thermal Engineering cover
Applied Thermal Engineering
IF:
6.9
Papers:
2.8W
Citations:
10.6W

Organization

S
Siirt University
Scholars:
675
Papers: 922
Citations: 11
Y
Yildiz Technical University
Scholars:
5.7K
Papers: 5.3K
Citations: 42
D
dogus university
Scholars:
667
Papers: 794
Citations: 1
researcher View more organizations
Cited Papers

Cited Papers

Infective endocarditis following transcatheter edge‐to‐edge mitral valve repair: A systematic review
err2018-05-10
err0
PREAI
errLluis Asmarats; Tania Rodriguez‐Gabella; Chekrallah Chamandi; Mathieu Bernier; Jonathan Beaudoin; Kim O'Connor; Eric Dumont; François Dagenais; Jean‐Michel Paradis; Josep Rodés‐Cabau
errShare
errSave
Effect of rectangular winglet pair roll angle on the heat transfer enhancement in laminar channel flow
err2017-04-01
err44
errOAAI
errKhanjian, Assadour; Habchi, Charbel; Russeil, Serge; Bougeard, Daniel; Lemenand, Thierry
errShare
errSave
errShare
errSave
Pressure drop measurements in a microchannel
err2004-04-16
err227
PREAI
errPfund, D; Rector, D; Shekarriz, A; Popescu, A; Welty, J
errShare
errSave
Review article: Microscale evaporative cooling technologies for high heat flux microelectronics devices: Background and recent advances
err2021-07-01
err64
PREAI
errNahar, Mun Mun; Ma, Binjian; Guye, Kidus; Chau, Quan H.; Padilla, Jorge; Iyengar, Madhusudan; Agonafer, Damena
errShare
errSave
researcher View more