.png){kind=icon}
Return
Frequential lithium-ion battery impedance identification using automatic model selection and initialization
.png){kind=icon}
PRE
AI
DOI：10.1016/j.arcontrol.2025.101011.png)
.png){kind=icon}
Original request for help.png){kind=icon}
Share.png){kind=icon}
Save
Abstract
En 中文
Electrochemical Impedance Spectroscopy (EIS) is a useful tool for selecting a pertinent Equivalent Circuit Model (ECM) of a Lithium-ion battery. Impedance model is designed to describe low, middle and high frequency electrochemical processes involved. When considering low frequency restricted in the Warburg zone, diffusion impedance is modeled thanks to a Constant Phase Element (CPE) which behaves as a fractional integrator of order n close to 0.5. Phenomena observed in middle frequency are described using specific circuits called Zarc which consist in connecting a CPE in parallel with a resistor. Therefore, the global impedance model is characterized by non integer order operators and parameters can be estimated by a Complex Nonlinear Least Squares (CNLS) algorithm which requires a proper initialization in order to guarantee the convergence to a global optimum. The paper presents a method to analyze EIS data measurements in order to select automatically the number of middle frequency Zarc circuits required (one or two) and to initialize properly the CNLS algorithm. The method is validated using simulation data as well as experimental open source EIS data.
Keywords:
Electrochemical Impedance Spectroscopy
Equivalent Circuit Model
Constant Phase Element
Zarc Circuit
Complex Nonlinear Least Squares
Journal
IF:
10.7
Papers:
832
Citations:
5.9K
Organization
No organization information available
Cited Papers
.png){kind=icon}
ShareSaveShareSaveShareSaveA flexible procedure for analyzing impedance spectroscopy results: Description and illustrations
PREAI
ShareSaveShareSaveShareSave
View more