.png){kind=icon}
Return
Grid code analysis considering converter-based grid voltage support during faults
.png){kind=icon}
PRE
AI
DOI：10.1016/j.ijepes.2023.109000.png)
.png){kind=icon}
Original request for help.png){kind=icon}
Share.png){kind=icon}
Save
Abstract
En 中文
Modern power systems are increasingly integrated with power electronic converters, which allow precise control of active and reactive current injections within a certain range of operation. Power converters are usually required to provide grid voltage support service in case of fault. This poses the challenge to determine the current injection from a converter that maintains the grid voltage while not surpassing the converter's current limitation. Conventional grid codes simply set the linear relationship between the voltage droop and the grid-support current, consequently not providing the optimized voltage support. In this paper, the grid voltage support operation of power converters is analysed from an optimization perspective. A formulation for the analysis of faults in a generic system is presented. Numerical cases have been studied with different fault scenarios. The optimized solutions show the traditional grid code can be potentially improved in order to maintain the grid voltage closer to the nominal value during the fault. In this line, two improved adaptations of this grid code have been proposed. These two alternative grid codes have been found to be near-optimal as they just differ slightly from the optimized results despite only injecting reactive power.
Keywords:
VSC
Grid-support
Optimization
Asymmetrical fault
Current saturation
Journal
I
IF:
5
Papers:
1.1W
Citations:
3.1W
Organization
Cited Papers
.png){kind=icon}
ShareSave
ShareSaveShareSaveShareSaveCurrent Saturation Analysis and Anti-Windup Control Design of Grid-Forming Voltage Source Converter
PREAI
ShareSave
View more