.png){kind=icon}
.png){kind=icon}
Return
Hierarchically Oriented Carbon Nanotubes/Poly(vinyl Alcohol) Composite Conductive Hydrogels for Flexible Strain Sensors
.png){kind=icon}
PRE
AI
L
S
Q
W
J
Z
DOI：10.1021/acsami.5c23930.png)
.png){kind=icon}
Original request for help.png){kind=icon}
Share.png){kind=icon}
Save
Abstract
En 中文
Hydrogels have been widely used in flexible electronics due to their water content similar to that of muscles and other biological tissues. However, it was a challenge to significantly improve mechanical robustness and electrical conductivity owing to their trade-off. To address this, a synergistic method of freeze casting and hot pressing was proposed to create a multiscale hierarchical structure in the hydrogel. In detail, the mixture of poly(vinyl alcohol) (PVA) and cellulose nanofibers (CNFs) with dispersed carbon nanotubes (CNTs) was freeze-cast and freeze-dried, then hot-pressed to enhance the crystallinity, and swollen to form an oriented PVA/CNT@CNF hydrogels. The resulting hydrogel (CNT:PVA mass ratio of 2:10) exhibited good comprehensive performances, with an electrical conductivity of 0.124 S m–1, a tensile strength of 6.22 MPa, and a crystallinity of 13.98 wt %. Notably, the fracture energy displayed pronounced anisotropy, reaching 16.41 kJ m–2 along the frozen direction, 2.47 times that in the perpendicular direction. Owing to its high conductivity and structural stability, the assembled flexible sensor can reliably monitor human motions (e.g., finger and wrist bending) and functions effectively as a touch-sensitive keypad for rapid and accurate human-machine interaction. This work offered a new strategy to prepare conductive hydrogels with high crystallinity for wearable sensing, health monitoring, and soft robotics.
Keywords:
Carbon nanotubes
Electrical conductivity
Freezing
Hydrogels
Sensors
hierarchical structure
freeze casting
carbon nanotube
poly(vinyl alcohol)
conductive hydrogel
strain sensor
Journal
A
IF:
0
Papers:
65
Citations:
1
Organization
Cited Papers