.png){kind=icon}
.png){kind=icon}
Return
Hydrogen Bubble Templated Growth of Honeycomb-Like Au-Pt Alloy Films for Non-Enzymatic Glucose Sensing
.png){kind=icon}
PRE
AI
DOI：10.1149/2.0301614jes.png)
.png){kind=icon}
Original request for help.png){kind=icon}
Share.png){kind=icon}
Save
Abstract
En 中文
Au and Pt based nanomaterials have shown great promise for non-enzymatic based electrochemical glucose sensing, however obtaining a balance between good selectivity and high sensitivity is still an ongoing challenge. In this work we have developed glucose sensors that take advantage of the properties of both metals through the formation of bi-metallic Au-Pt alloy honeycomb-like structures with controlled Pt content during electrodeposition. The honeycomb-like structures were formed by employing hydrogen gas bubbles developed in-situ as a dynamic template. The developed films were found to possess large surface areas with a homogeneous spread of Au and Pt throughout the surface, enabling both high sensitivity and selectivity when compared to monometallic metal nanostructures. The sensitivity and experimental detection limit of the developed glucose sensor was determined to be 109.3 mu A.mM(-1) . cm(-2) (after a 10 s stabilization period) and 20 mu M, respectively. Selectivity studies showed minimal to no interference in the presence of Acetic Acid (AA) and Uric Acid (UA), which we have attributed to the Au component of the electrodeposited nanostructures allowing detection at a lower potential, overcoming the lack of selectivity typically experienced by Pt. (C) 2016 The Electrochemical Society. All rights reserved.
Keywords:
SURFACE-ACOUSTIC-WAVE
ELECTROCHEMICAL OXIDATION
CARBON NANOTUBES
SINGLE-CRYSTAL
GOLD
PLATINUM
SENSOR
ELECTROOXIDATION
ELECTRODE
NANOPARTICLES
AI Summary
Key information extracted from the uploaded paper, including a brief overview, abstract, background, key highlights, visual analysis, and future outlook.
Journal
IF:
3.3
Papers:
3.3W
Citations:
9.4W
Organization
No organization information available