.png){kind=icon}
.png){kind=icon}
Return
Improved halftoning method for autostereoscopic display based on float grid-division multiplexing
.png){kind=icon}
OA
AI
DOI：10.1364/OE.24.018114.png)
.png){kind=icon}
.png){kind=icon}
Share.png){kind=icon}
Save
Abstract
En 中文
Autostereoscopic printing is one of the most common ways for three-dimensional display, because it can present finer results by printing higher dots per inches (DPI). However, there are some problems for current methods. First, errors caused by dislocation between integer grids and non-customized lenticular lens result in severe vision quality. Second, the view-number and gray-level cannot be set arbitrarily. In this paper, an improved halftoning method for autostereoscopic printing based on float grid-division multiplexing (fGDM) is proposed. FGDM effectively addresses above two problems. GPU based program of fGDM is enabled to achieve the result very fast. Films with lenticular lens array are implemented in experiments to verify the effectiveness of proposed method which provides an improved three-dimensional performance, compared with the AM screening and random screening. (C) 2016 Optical Society of America
Keywords:
SMOOTH MOTION PARALLAX
3-DIMENSIONAL DISPLAY
AI Summary
Key information extracted from the uploaded paper, including a brief overview, abstract, background, key highlights, visual analysis, and future outlook.
Journal
IF:
3.3
Papers:
6.1W
Citations:
14.3W