.png){kind=icon}
.png){kind=icon}
Return
Lead zirconate titanate MEMS accelerometer using interdigitated electrodes
.png){kind=icon}
PRE
AI
DOI：10.1016/S0924-4247(03)00271-1.png)
.png){kind=icon}
Original request for help.png){kind=icon}
Share.png){kind=icon}
Save
Abstract
En 中文
Piezoelectric bulk micromachined accelerometers have been designed and fabricated using silicon micromachining techniques. These devices use interdigitated (IDT) electrodes to exploit a combination of the d(33) and d(31) piezoelectric responses of lead zirconate titanate (PZT) thin films. A simple fabrication process involving only three photomasks and two deep-trench reactive ion-etching (DRIE) steps has been developed. Frequency response measurement has been used to measure the sensitivity of the devices as well as the bandwidth. Voltage sensitivities in the range of 1.3-7.86 mV/g with corresponding resonance frequencies in the range of 23-12 kHz have been obtained for these accelerometers. The voltage sensitivity mode of the interdigitated electrode accelerometer results in a higher acceleration sensitivity than that for a through-the-thickness poled PZT accelerometers with identical device structure. (C) 2003 Elsevier B.V. All rights reserved.
Keywords:
MEMS accelerometer
lead zirconate titanate (PZT)
interdigitated electrode
piezoelectric accelerometer
AI Summary
Key information extracted from the uploaded paper, including a brief overview, abstract, background, key highlights, visual analysis, and future outlook.
Journal
IF:
4.9
Papers:
1.5W
Citations:
3.3W
Organization
No organization information available