Return
Lithium-Graphite Paste: An Interface Compatible Anode for Solid-State Batteries
DOI:10.1002/adma.201807243.png)
Abstract
En 中文
All-solid-state batteries (ASSBs) with ceramic-based solid-state electrolytes (SSEs) enable high safety that is inaccessible with conventional lithium-ion batteries. Lithium metal, the ultimate anode with the highest specific capacity, also becomes available with nonflammable SSEs in ASSBs, which offers promising energy density. The rapid development of ASSBs, however, is significantly hampered by the large interfacial resistance as a matched lithium/ceramic interface that is not easy to pursue. Here, a lithium-graphite (Li-C) composite anode is fabricated, which shows a dramatic modification in wettability with garnet SSE. An intimate Li-C/garnet interface is obtained by casting Li-C composite onto garnet-type SSE, delivering an interfacial resistance as low as 11 omega cm(2). As a comparison, pure Li/garnet interface gives a large resistance of 381 omega cm(2). Such improvement can be ascribed to the experiment-measured increased viscosity of Li-C composite and simulation-verified limited interfacial reaction. The Li-C/garnet/Li-C symmetric cell exhibits stable plating/striping performance with small voltage hysteresis and endures a critical current density up to 1.0 mA cm(-2). The full cell paired with LiFePO4 shows stable cycle performance, comparable to the cell with liquid electrolyte. The present work demonstrates a promising strategy to develop ceramic-compatible lithium metal-based anodes and hence low-impedance ASSBs.
Keywords:
all-solid-state batteries
interfacial compatibility
lithium-graphite composite
low interfacial impedance
paste
AI Summary
Key information extracted from the uploaded paper, including a brief overview, abstract, background, key highlights, visual analysis, and future outlook.
Journal
IF:
26.8
Papers:
3.5W
Citations:
46.0W
Organization
Cited Papers
Toward garnet electrolyte-based Li metal batteries: An ultrathin, highly effective, artificial solid-state electrolyte/metallic Li interface
SCIENCE ADVANCES
IF12.5
Promises and challenges of nanomaterials for lithium-based rechargeable batteries
NATURE ENERGY
IF60.1
An in situ element permeation constructed high endurance Li-LLZO interface at high current densities
Stable cycling of double-walled silicon nanotube battery anodes through solid-electrolyte interphase control
NATURE NANOTECHNOLOGY
IF34.9
Metal segregation in hierarchically structured cathode materials for high-energy lithium batteries
NATURE ENERGY
IF60.1

