Localization of multiple defects using the compact phased array (CPA) method

Volkan Senyurek

doi:10.1016/j.jsv.2017.10.037

Localization of multiple defects using the compact phased array (CPA) method

2018-01-01

24

PRE

AI

DOI：10.1016/j.jsv.2017.10.037

Original

Original request for help

Save

Abstract

En 中文

Array systems of transducers have found numerous applications in detection and localization of defects in structural health monitoring (SHM) of plate-like structures. Different types of array configurations and analysis algorithms have been used to improve the process of localization of defects. For accurate and reliable monitoring of large structures by array systems, a high number of actuator and sensor elements are often required. In this study, a compact phased array system consisting of only three piezoelectric elements is used in conjunction with an updated total focusing method (TFM) for localization of single and multiple defects in an aluminum plate. The accuracy of the localization process was greatly improved by including wave propagation information in TFM. Results indicated that the proposed CPA approach can locate single and multiple defects with high accuracy while decreasing the processing costs and the number of required transducers. This method can be utilized in critical applications such as aerospace structures where the use of a large number of transducers is not desirable. (C) 2017 Elsevier Ltd. All rights reserved.

Keywords:

Phased array

Beam forming

Lamb wave

Total focusing method

Damage localization

Localization of multiple defects using the compact phased array (CPA) method

Abstract

AI Summary

Journal

Organization