.png){kind=icon}
Return
Material Characterization Using Complementary Split-Ring Resonators
.png){kind=icon}
PRE
AI
DOI：10.1109/TIM.2012.2203450.png)
.png){kind=icon}
Original request for help.png){kind=icon}
Share.png){kind=icon}
Save
Abstract
En 中文
A microwave method based on complementary split-ring resonators (CSRRs) is proposed for dielectric characterization of planar materials. The technique presents advantages such as high measurement sensitivity and eliminates the extensive sample preparation procedure needed in resonance-based methods. A sensor in the shape of CSRRs working at a 0.8-1.3 GHz band is demonstrated. The sensor is etched in the ground plane of a microstrip line to effectively create a stopband filter. The frequencies at which minimum transmission and minimum reflection are observed depend on the permittivity of the sample under test. The minimum transmission frequency shifts from 1.3 to 0.8 GHz as the sample permittivity changes from 1 to 10. The structure is fabricated using printed circuit board technology. Numerical findings are experimentally verified.
Keywords:
Complementary split-ring resonators (CSRRs)
material characterization
near-field sensors
AI Summary
Key information extracted from the uploaded paper, including a brief overview, abstract, background, key highlights, visual analysis, and future outlook.
Journal
IF:
5.9
Papers:
2.0W
Citations:
5.8W
Organization
Cited Papers
Plate‐related complication and health‐related quality of life after mandibular reconstruction by fibula flap with reconstruction plate or miniplate versus anterolateral thigh flap with reconstruction plate.png)
Microsurgery
MicrosurgeryIF0
PREAI
ShareSave
ShareSaveShareSaveShareSaveShareSaveShareSaveShareSave
View more