.png){kind=icon}
.png){kind=icon}
Return
Memristive Monte Carlo DropConnect crossbar array enabled by device and algorithm co-design
.png){kind=icon}
PRE
AI
DOI：10.1039/d3mh02049e.png)
.png){kind=icon}
Original request for help.png){kind=icon}
Share.png){kind=icon}
Save
Abstract
En 中文
Device and algorithm co-design aims to develop energy-efficient hardware that directly implements complex algorithms and optimizes algorithms to match the hardware's characteristics. Specifically, neuromorphic computing algorithms are constantly growing in complexity, necessitating an ongoing search for hardware implementations capable of handling these intricate algorithms. Here, we present a memristive Monte Carlo DropConnect (MC-DC) crossbar array developed through a hardware algorithm co-design approach. To implement the MC-DC neural network, stochastic switching and analog memory characteristics are required, and we achieved them using Ag-based diffusive selectors and Ru-based electrochemical metalization (ECM) memristors, respectively. The devices were integrated with a one-selector one-memristor (1S1M) structure, and their well-matched operating voltages and currents enabled stochastic readout and deterministic analog programming. With the integrated hardware, we successfully demonstrated the MC-DC operation. Additionally, the selector allowed for the control of switching polarity, and by understanding this hardware characteristic, we were able to modify the algorithm to fit it and further improve the network performance. A one-selector-one-memristor crossbar array was developed, capable of driving Monte Carlo DropConnect network. This could be achieved through a hardware and algorithm co-design approach, involving mutual improvement of them.
Journal
IF:
10.7
Papers:
3.6K
Citations:
2.4W
Organization
No organization information available