Return
Microbubble-Based Fiber Optofluidic Interferometer for Sensing
DOI:10.1109/JLT.2017.2696957.png)
Abstract
En 中文
A fiber optofluidic interferometer based on an optical microbubble-on-tip (mu BoT) structure is developed. The generation process and sensing mechanism of this mu BoT sensor are very different from traditional optical fiber sensors. The mu BoT is a hybrid solid/liquid/gas microstructure generated by heating a fiber tip with laser and can be easily regenerated with low cost and good repeatability. Carbon nanotube film is optically deposited on the fiber end face to increase the laser absorption, thus enhances the efficiency of the mu BoT generation. The diameter of the mu BoT interferometer increases with time, leading to a decrease in the free spectral range (FSR). By measuring the FSR, the temperature and flow rate sensing are demonstrated. A temperature sensitivity of -1146 pm/degrees C is achieved, which is two orders of magnitude higher than that of the widely used fiber Bragg gratings. A lower limit of detection of 10 nL/min and a resolution of 0.03 nL/min for the flow rate sensing are obtained, which is better than that of the state-of-the- art microfluidic flow meters. Our study will open a door to the development of novel reconfigurable fiber optofluidic sensors.
Keywords:
Fiber optic sensors
interference
optofluidics
AI Summary
Key information extracted from the uploaded paper, including a brief overview, abstract, background, key highlights, visual analysis, and future outlook.
Journal
IF:
4.8
Papers:
1.7W
Citations:
3.8W
Organization
Cited Papers
Highly sensitive fibre surface-enhanced Raman scattering probes fabricated using laser-induced self-assembly in a meniscus
NANOSCALE
IF5.1
A label-free infrared opto-fluidic method for real-time determination of flow rate and concentration with temperature cross-sensitivity compensation
LAB ON A CHIP
IF5.4

