.png){kind=icon}
Return
Microstructural evolution in semi-solid AA7034
.png){kind=icon}
PRE
AI
DOI：10.1007/s10853-007-2151-3.png)
.png){kind=icon}
Original request for help.png){kind=icon}
Share.png){kind=icon}
Save
Abstract
En 中文
The kinetics of semi-solid grain coarsening in a spray-formed AA7034 aluminium alloy were determined by the use of ex situ coarsening experiments. The coarsening rate constant of the alloy decreases with increasing solid fraction for solid fractions greater than 0.65. For solid fractions between 0.6 and 0.65, the coarsening rate constant increases as the solid fraction increases. For solid fractions below 0.6, the coarsening rate constant decreases again with increasing solid fraction. A model of flow-enhanced diffusion was developed to explain the grain-coarsening behaviour at low solid fractions, with flow caused by the macroscopic shape change of the uncontained semi-solid material during coarsening. Together with previous liquid film and modified liquid film migration models, the flow-enhanced diffusion model shows qualitative agreement with available experimental results.
Keywords:
SPRAY
ALLOYS
STATE
Journal
IF:
3.9
Papers:
3.2W
Citations:
7.2W
Organization
Cited Papers
ShareSave
The morphology of high volume fraction solid-liquid mixtures: An application of microstructural tomography.png)
ACTA MATERIALIA
ACTA MATERIALIAIF9.3
PREAI
ShareSaveShareSaveShareSaveEquiaxed-grain size analysis in the mushy zone during solidification via an in-situ method based on the electrical sensing zone principleSCRIPTA MATERIALIA
SCRIPTA MATERIALIAIF5.6
PREAI
ShareSaveShareSaveShareSaveShareSave
View more